Talytron S200 Air Supported Traversing Table:
For precision straightness measurement of long work pieces.  The 2000mm (8in.) traverse is reversible and there are 5 speeds.
Catalog Specifications:
Worktable:
Size 250 X 150 mm
Maximum Load 30 kg
Range of levelling adjustment in traverse direction /-0.5 degrees
Range of levelling adjustment at right angles to traverse direction /-1.25 degrees
Range of rotational movement 0.75 degrees
Traverse
Length: 200 mm
Accuracy of traverse speeds within /-2%
Straghtness accuracy:  (excluding the first 5 mm of movement)  In both vertical and horizontal planes, the line of movement of any point on the worktable surface is contained between two parallel straight lines 0.5 mm apart.  The attitude of the wroktabel does not cary by more than 1 sec of arch throughout the traverse length.
Parallelism: The line of traverse is parallel to the plane of the base supporting pegs within 10mm over the traverse length.  Vibration (with table mounted ona  rigid support): Does not exceed 0.1 mm
Weight Approx 30kg
Overall Dimensions: 525 X 220 X 130mm
Operating instructions.
(Inv.16670)

Handling Charge of $100 In Addition To Winning Bid. Skidding extra if required.

Terms and Conditions of Sale